SOLAC CT8607 Instrucciones De Uso página 8

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 6
ENGLISH
DESCRIPTION
1. Product
2. Fabric
3. Power cord
4. Power cord connector
5. Product connector
6. Control knob
a. ON/OFF button
b. Temperature control button
c. Time setting button
d. Temperature setting display screen
USE AND CARE:
Fully unroll the appliance's power cable before
each use.
Do not use the appliance if the ON/OFF switch
does not work.
Disconnect the appliance from the mains when
not in use and before undertaking any cleaning
task.
Store this appliance out of reach of children
and/or those with reduced physical, sensorial
or mental abilities or who are unfamiliar with
its use
Never leave the appliance connected and una-
ttended if not in use. This also saves energy
and prolongs the life of the appliance.
USE
BEFORE USE:
Make sure that all the product's packaging ma-
terial has been removed.
USE:
This appliance has been designed exclusively
for heating specific areas of the body. Do not
use it for any other purpose.
FITTING THE PRODUCT
Connect the power cord connector (4) to the
product connector (5) (fig. 1). Make sure it is
securely connected.
Plug the power cord (3) into the mains.
The display screen (d) will light up for a mo-
ment, displaying an '8' on the screen and then
disappear, leaving a dot on the screen. You
can now select the desired time and tempera-
ture settings. (fig.2).
SELECTING THE TEMPERATURE
Press the ON/OFF button (a).
The display screen will light up (d) and show
temperature position 1.
If the letter E flashes on the display, please
refer to the "Troubleshooting" section" (fig. 3).
There are 10 temperature settings, from 1 to
10. Positions 1 to 9 will be displayed as the
numbers 1 to 9, whereas position 10, being the
highest setting, , is displayed as 'H'.
These temperatures are approximate and may
vary slightly while the appliance is in use.
If you would like to increase the temperature,
press the temperature position button (b) until
the desired temperature position appears on
the display screen (d) (fig. 4).
If the product becomes too hot for your liking,
press the temperature control button again (b).
It will once again return to the start position.
CHOOSING THE TIME SETTING
There are 9 time settings, from 1 to 9 hours.
You can select the time using button (c).
Once the selected time has elapsed, the
appliance will switch off automatically.
SWITCHING OFF AND UNPLUGGING
Press the ON/OFF button (a).
Disconnect the power cord from the product
connector.
Unplug the power cord from the mains supply
(3).
Allow the product to cool down before storing
or cleaning it.
TROUBLESHOOTING
If the letter E appears on the display screen,
proceed as follows:
Check that the power cord connector (4) is co-
rrectly inserted into the product connector (5).
If not, press the ON/OFF button (a) and insert
it correctly.
Check that the operation error is not caused
by overheating. To do so, press the ON/OFF
button (a) and allow the product to cool. Find
out what is causing the product to overheat and re-
move the cause.
Do not cover this product with plastic bags or
any additional covers.
If the appliance stops working, contact an au-
thorised technical service.
EN

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Ct8608

Tabla de contenido