How To Use; Description Of Parts; Before First Use - Westinghouse WKWKB115SS Manual De Instrucciones

HOW TO USE

DESCRIPTION OF PARTS

1
2
3
NOTE: All images shown are for illustrative purposes only and may not be an exact
representation of the product model.

BEFORE FIRST USE

• Remove all packaging from the appliance.
• Unpack all parts and check for damage that may have occurred during
transport. If any parts are damaged or missing, do not use the appliance and
return it to your retail outlet immediately.
• Rinse the interior of the kettle thoroughly before first use. Fill the kettle up to
the MAX mark, boil and then discard the water. Repeat 2-3 times. Then finally
rinse the inside with cold water and with a soft damp cloth wipe the outside of
the kettle.
OPERATING INSTRUCTIONS
1. Remove the kettle (2) from the power base (3).
2. Press the lid open button (5) to pop up the lid (4).
3. Fill the kettle (2) with the desired amount of water. Ensure the water level is
above the minimum marking (MIN 1.0 L) and below the maximum marking
(MAX 1.7 L) on the water level gauge (6).
4. Close the lid (4) by pushing it firmly in place.
5. Place the kettle (2) on the power base (3) making sure it is in the correct
position.
6. Plug the power cord (9) into the wall socket.
WKWK115_Electric Kettle_10L_IM.indd 5
4
1. Spout
2. Kettle
3. Power base
4. Lid
5. Lid open button
5
6
7
8
9
6. Water level gauge
7. Handle
8. ON/OFF switch
9. Power cord and plug
10. Scale filter
10
EN
5
29/7/2021 6:45 PM