Specifications - Master Forge WS110 Instrucciones De Funcionamiento Y Manual Del Propietario

SPECIFICATIONS

Model #
Stove Dimensions WxLxH [in (cm)]
Flue Colar
Fuel
Maximum Burn Time (Mins.)*
EPA Compliance**
Heat Output Range
Particulate Emissions (g/hr)
Efficiency
Tested To
*Maximum burn times are heavily dependent on the type of wood burned in the stove, so these numbers
may vary.
** U.S. ENVIRONMENTAL PROTECTION AGENCY Certified to comply with 2020 particulate emission stan-
dards using cord wood.
PLEASE READ THIS ENTIRE MANUAL BEFORE YOU INSTALL AND USE YOUR NEW STOVE. FAILURE TO
FOLLOW INSTRUCTIONS MAY RESULT IN PROPERTY DAMAGE, BODILY INJURY, OR EVEN DEATH.
THIS WOOD HEATER NEEDS PERIODIC INSPECTION AND REPAIR FOR PROPER OPERATION. IT IS
AGAINST FEDERAL REGULATIONS TO OPERATE THIS WOOD HEATER IN A MANNER INCONSISTENT
WITH OPERATING INSTRUCTIONS IN THIS MANUAL.
Master Forge Wood Fire Stove
(57.8 x 71.1 x 80)
OPERATION SPECIFICATIONS
EPA and SAFETY COMPLIANCE SPECIFICATIONS
17,400 BTU/HR to 49,138 BTU/HR
UL-1482 7th ed. Standard for solid-fuel type room heater
ULCS-627-00 Standard for Space Heaters for use with Solid Fuels
E3
WS1 10
DIMENSIONS
22.75 x 28 x 31.5
6.0 in. Round
Wood
503
Certified
.99
70.34% HHV
Operating Instructions and Owner's Manual