HyperX Cloud MIX Buds Guia De Inicio Rapido página 6

ENGLISH
Overview
A - Charging contacts
B - Touch sensor
C - Microphones
D - Charging case
Powering on and o the Earbuds
CHARGING CASE STATUS LED
Green
Yellow
Red
To power on the earbuds, open the charging case. The charging case status LED will show the battery level of the
earbuds.
To power o the earbuds, return them to the charging case and close the lid. The case LED will turn o .
Pairing the Earbuds
1. With the earbuds inserted, open the lid of the charging case.
2. Press and hold the charging case button for 3 seconds. The charging case status LED will begin ashing blue.
3. On your Bluetooth® enabled device, search for and connect to HyperX Cloud MIX Buds. Once connected, the
charging case status LED will turn solid blue and fade o , returning to the battery level indication.
Connecting the Low Latency USB Adapter
1. Connect the low latency USB adapter to your mobile device, PC, or video game console. The USB adapter status LED
will begin ashing white. When not being used with a mobile device, it is recommended that the included extension
adapter and USB-C to USB-A cables be used.
2. When the earbuds are powered on, they will automatically connect to the USB adapter, and the USB adapter status
LED will breathe white.
Using the Touch Controls
The following media controls are available when using Bluetooth® or the low latency USB adapter:
1 PRESS 2 PRESSES
Play/Pause Skip Track
The following phone controls are available when using Bluetooth®:
STATUS
Receiving Call
In Call
E - Charging case status LED
F - USB-C port
G - Charging case button
H - Low latency USB adapter
NIVEAU DE BATTERIE DES ÉCOUTEURS
3 PRESSES
Previous Track
1 PRESS
Answer Call
X
I - USB adapter status LED
J - USB adapter button
K - Extension adapter
L - Silicone case
51 % - 100 %
16 % - 50 %
< 15 %
LONG PRESS
Mute/Unmute Microphones
2 PRESSES 3 PRESSES
Reject Call
End Call
M - Ear tips (large, small)
N - USB-C to USB-A cable
LONG PRESS
X
X Mute/Unmute Microphones
X