Using The Device; Cleaning And Maintenance; Troubleshooting - Dometic SP230 Instrucciones De Uso

EN
• A copy of the receipt with purchasing date
• A reason for the claim or description of the fault
Note that self-repair or nonprofessional repair can have safety consequences and might void the warranty.

9 Using the device

The device operates without any handling from the user. The device detects power input and switches automatical-
ly as soon as a change of the input supply is detected. The monitoring automatically detects whether the external
230 V mains voltage is available and supplies it directly to the 230 V sockets. If the external 230 V mains volt-
age is not present, the interior sockets are either supplied from the inverter or not at all, depending on which output
connection that is used.
Three LED indicators show power supply:
Green LED indicator
INVERTER
OUTPUT
MAIN 230V

10 Cleaning and maintenance

The device is maintenance-free.
Occasionally clean the product with a damp cloth.

11 Troubleshooting

The electrical power supply must be connected by a qualified electrician who has demonstrated skill and
knowledge related to the construction and operation of electrical equipment and installations, and who
is familiar with the applicable regulations of the country in which the equipment is to be installed and/or
used, and has received safety training to identify and avoid the hazards involved.
Problem
No input voltage shown.
8
Description
Voltage in from the inverter.
Voltage out on the OUTPUT connection.
Voltage in from IN and OUT connections.
Possible cause
Broken fuse.
Fault in wiring.
Suggested remedy
1. Open the fuse holder cap.
2. Replace the defective fuse with a fuse
with the same rating.
Make sure the wiring is done ac-
cording to the wiring diagrams in
the installation procedure.