use only when the locking mecha-
nisms are engaged. Make sure they
are securely fixed before use.
• When the product is being used,
especially in "crib configuration",
the wheels must always be locked.
• All operations for opening, adjust-
ing, fastening and positioning the
product must be carried out by an
adult.
• WARNING: When the crib is
used in co-sleeping mode, be
sure that the soft barrier is al-
ways in contact with the par-
ent's mattress.
• Do not use the product without
the frame.
• WARNING: Read the instructions
for use for the list of components.
Examine the product regularly to
make sure that there are no loose,
damaged or missing parts.
• WARNING: Always use all parts
needed for each configuration of
use.
• Before assembling, ensure that the
product and its components have
not been damaged during trans-
portation. In this case, do not use
and keep out of reach of children.
• Make sure that the adult using the
product knows how it works, in ac-
cordance with manufacturer's in-
structions.
• Use the crib in "Side sleeping con-
figuration (fastened to the bed)"
only with beds of the size indicted
in the reference figure at the begin-
ning of the manual.
• WARNING: Use the product with
beds
and/or
straight sides only. Do not use the
product with round beds and/or
mattresses
with
mattresses or water mattresses.
• WARNING: When used in the
"Co-Sleeping Configuration" (fas-
tened to the bed), the crib must
never be inclined.
• To prevent danger of choking due
to the child's head being trapped,
when the crib is in the "Co-Sleep-
ing Configuration" (fastened to the
bed) it should be properly fastened
to the parents' bed with the fixing
straps as explained in the instruc-
tion booklet.
• WARNING: The fixing straps are in-
cluded in the packaging. Other fas-
tening systems must NOT be used.
• WARNING: Keep the fixing straps
out of reach of children.
• WARNING: Before placing the
child inside the crib when the
product is in the "Co-Sleeping Con-
figuration" (fastened to the bed),
be sure that the fixing straps are
fastened and tightened correctly.
The product must be attached to
the parents' bedframe and there
should be no gaps between the
lowest part of the co-sleeping crib
and the parents' mattress
• WARNING: There must never be
an empty space between the low-
er side of the crib in "Co-Sleeping
Configuration (fastened to the
bed)" and the parents' mattress.
• Before using in "Co-sleeping con-
figuration (fastened to bed), " make
sure the product is fastened and
positioned correctly. Check the
fastening system hold before each
use by attempting to push the crib
away from the parents' bed.
• If there are gaps between the low-
est part of the co-sleeping crib and
13