Periodic Checks - Franke Active ACT-PO-CHR Manual De Instalación Y Servicio

Periodic checks

12
X
Check connection and shower hoses periodically for the following:
– watertightness
– corrosion
– mechanical damage
X
Use original spare parts only.
X
Replace damp or dripping hoses.
X
Replace hoses with rusty or oxidized surfaces.
X
Replace hoses that show signs of mechanical damage.
X
Flush all pipes thoroughly before installation.
Operating data
Operating pressure (ideal)
Operating pressure (max.)*
Operating pressure (min.)*
Water temperature (ideal)
Water temperature (max.)
* Equal pressure is recommended.
For any further information about our products, about the installation of them
or about the warranty please contact our customer service department (see
page 16).
Warranty website: https://www.franke.com/us/en/hs/support/warranty.html
Certifies this faucet complies with ASME A112.18.1 / CSA B125.1, NSF/ANSI/
CAN 61-2020 (AB100 compliant, Q<1 ) & NSF 372. The faucet also complies
with water usage requirements of the California Energy Commission and the
US Department of Energy.
Value
3 bar 45 PSI
5 bar 70 PSI
1 bar 14.5 PSI
60 °C 140 °F
70 °C 158 °F
11
EN
300 kPa
500 kPa
100 kPa