Bluetooth - Mobile Phone; Receive A Call - JVC KD-X382BT Manual De Instrucciones

Bluetooth®
Bluetooth — Mobile phone

Receive a call

When there is an incoming call:
• The buttons will blink in the blinking pattern you have selected in
[RING ILLUMI]. (Page 14)
• The unit answers the call automatically if [AUTO ANSWER] is set to a selected
time. (Page 14)
During a call:
• The buttons stop blinking.
• If you turn off the unit or detach the faceplate, Bluetooth is disconnected.
The following operations may differ or be unavailable depending on the
connected phone.
To
First incoming call...
Answer a call
Reject a call
End a call
While talking on the first incoming call...
Answer another incoming call
and hold the current call
Reject another incoming call
While having two active calls...
End current call and activate
held call
Swap between the current call
and held call
Adjust the phone volume*1
[00] to [35] (Default: [15])
Switch between hands-free and
private talk modes*2
*1 This adjustment will not affect the volume of the other sources.
*2 Operations may vary according to the connected Bluetooth device.
On the faceplate
Press or the volume knob.
Press and hold or the volume
knob.
Press and hold or the volume
knob.
Press or the volume knob.
Press and hold or the volume
knob.
Press and hold or the volume
knob.
Press .
Turn the volume knob during a call.
Press during a call.
ENGLISH
13