Using A Bluetooth Mobile Phone - JVC KD-R820BT Manual De Instrucciones

To delete a registered device
1 Press and hold MENU.
2 Turn the control dial to select
<Bluetooth>, then press to confirm.
3 Turn the control dial to select
<Delete Pairing>, then press to confirm.
4 Turn the control dial to select a device
you want to delete, then press to confirm.
"Delete OK?" appears.
5 Press the control dial to delete the
selection.
"OK" appears when the device is deleted.
To return to the previous menu, press BACK.

Using a Bluetooth mobile phone

Making a call
1
] Enter "HF Menu" screen.
2
] Select a calling method or make a
setting. (Dialed Calls/ Received Calls/
Missed Calls/ Phonebook/ Dial Number/
Voice/ Settings)
3 If "Dialed Calls/ Received Calls/
Missed Calls/ Phonebook" is selected
in step 2 ...
Turn the control dial to select the name/
phone number you want to call, then
press the control dial to confirm.
• "No History Found" appears if there is no
history stored.
• "No Entries Found" or "Send Phonebook
Manually" appears depending on the
"Phonebook Select" settings. (page 14)
To connect/disconnect a registered device
1 Press and hold MENU.
2 Turn the control dial to select
<Bluetooth>, then press to confirm.
3 Turn the control dial to select
<Connect Phone/ Connect Audio> or
<Disconnect Phone/ Disconnect Audio>,
then press to confirm.
4 Turn the control dial to select a device
you want to connect/disconnect, then
press to confirm.
"Connected [Device name]/ Disconnected
[Device name]" appears when the device is
connected/disconnected.
If "Dial Number" is selected in step 2 ...
Enter the phone number to dial.
Turn the control dial to select a number
or character (0 – 9,
/¢ to move to the entry position.
Once you finished entering the number,
press the control dial to confirm.
If "Voice" is selected in step 2 ...
Speak the name (registered words) you
want to call when "Waiting Voice [Device
Name]" appears.
• Press and hold
dial operation directly if only one phone
is connected.
If two phones are connected, pressing
and holding
screen. Turn the control dial to select a
phone to activate voice dial operation,
then press to confirm.
• Only accessible when the connected
mobile phone has the voice recognition
system.
• "Not Support" appears if the connected
phone does not support this feature.
, #, +), press 4
*
to activate voice
will enter "Phone list"
Continued...
ENGLISH 13