+GF+ JRGURED LF Instrucciones De Instalación página 15

Identification
- 1/2 – 2 1/2 (DN/valve size)
- JRGURED LF (name of the valve)
- JRG (manufacturer's trademark)
- Flow direction arrows
Factory setting
The pressure-reducing valve JRGURED LF are
set at the factory to the following outlet pres-
sures:
JRG Code 1319 56 psi
JRG Code 1339 80 psi
Other pressure settings on request.
Installation requirements
Applicable for the installation of the
JRGURED LF pressure-reducing valve
are the guidelines of the local water utility.
Installation
The pressure-reducing valve
JRGURED LF must only be installed
using suitable tools.
Installed position
The pressure-reducing valve JRGURED LF
functions independently of its installed position.
It should be installed in an easily
accessible location in the line.
For maintenance of the internal
strainer, a minimum space of 2"
(60 mm) must be allowed.
2"
E
15