HOMCOM 800-111 Instrucciones De Montaje página 23

21. This appliance is intended to be used in household and similar applications such as:
– staff kitchen areas in shops, offices and other working environments;
– farm houses;
– by clients in hotels, motels and other residential type environments;
– bed and breakfast type environments.
22. Do not use outdoors.
23. Save these instructions.
25. If you do not use the product for a long time, you need to turn on the power and then
release steam for 3 minutes before leaving this product.
26.If you cut off power during steam release, residual heat will make product continue to
release steam for a length of time, the product will stop releasing steam immediately once you
turn off steam knob。
KNOW YOUR COFFEE MAKER
BEFORE THE FIRST USE
To ensure the first cup of coffee tastes excellent, you should rinse the coffee maker with
warm water as follows:
1. Pour water into water tank, the water level should not exceed the "MAX" mark in the tank.
Then replace the water tank cover.
Note: the appliance is supplied with a detachable tank for easy cleaning, you can fill the tank
with water firstly, and then put the tank into the appliance.
2. Set steel mesh into metal funnel (no coffee in steel mesh).
3. Place an jug on removable shelf. Make sure the steam control knob is on the OFF
position.
Note: the appliance is not equipped with jug, please use yourself jug or coffee cup.
4. Connect to power source, Press the power switch "" ." one time, the red indicator is
illuminated.
5. Press the coffee switch , the pump will pump water, when there is water flowing out and
close the pump by pressing the coffee switch , press the steam switch selector and wait
for a moment, the appliance begins to be pre-heated until the inner lamp of coffee switch
is illuminated, it shows the pre-heating is finished. Press the coffee switc hand water will