HOMCOM 800-111 Instrucciones De Montaje página 28

TROUBLE SHOOTING
Symptom
The metal parts in the
tank have rust.
Water leaks from
bottom of coffee maker.
Water leaks out of outer side
of filter.
Acid (vinegar) taste exists in
Espresso coffee.
The coffee maker cannot work
any more.
The steam cannot froth.
Do not take apart the appliance by yourself if the cause of failure is not found, you
had better contact certified serving center.
Cause
The descaler is not recommended
type. It may corrode the metal
parts in the tank.
the There is much water in the drip
tray.
The coffee maker is malfunction.
There is some coffee powder
on filter edge.
No clean
cleaning mineral deposits.
The coffee powder is stored
in a hot, wet place for a long
time. The coffee powder turns
bad.
The power outlet is not
plugged well.
The steam ready indicator is
not illuminated.
The container is too big or the
shape is not fit.
You have used skimmed milk
Corrections
Use the descaler
recommended by
manufacturer.
Please clean the drip tray.
Please contact with the
authorized service facility
for repairing.
Get rid of them.
correctly after Clean coffee maker per the
content in "before the first
use" for several times.
Please
powder,
coffee powder in a cool, dry
place.
package of coffee powder,
reseal it tightly and store it in a
refrigerator to maintain its
freshness.
Plug the power cord into a
wall outlet correctly, if the
appliance still does not work,
please
authorized service facility for
repairing.
Only after the steam ready
indicator is illuminated, the
steam can be used to froth.
Use high and narrow cup.
Use
half-skimmed milk
use fresh coffee
or store unused
After opening a
contact with the
whole milk or