PAJ VEHICLE FINDER 1.0 Manual De Instrucciones página 25

NOTE!
When connected to the power supply, the Vehicle
Finder 1.0 switches on immediately and the LED lights
emit a signal. If the FINDER is not connected to the vehic-
le battery, but at a different point (e.g. fuse box), this can
result in the ignition on / off function not being accurately
recognized.
-
+
ATTENTION!
The poles must never be reversed.
2.6 Turning on
After a successful activation you can switch on the
VEHICLE Finder 1.0. By connecting the FINDER to the power
supplythe device has already been switched on.
When starting the VEHICLE Finder 1.0 for the first
time, we recommend you do it in an open area such as
a garden, terrace, etc. (avoid switching it on indoors, in
a garage, cellar, etc.)
Black cable
-
Battery
8-32V
+
Red cable
25