Publicidad
Idiomas disponibles
Idiomas disponibles
Fanaway Fraser Installation Instructions
1
Mounting bracket x 1
2
Canopy x 1
3
Down rod with ball joint x 1
4
Bolt and pin cover x 1
5
Fan assembly x 1
6
Lamp base and shade x 1
•
The ceiling fan must be installed in a location so that the blades are spaced 300mm from the tip of the
blade to the nearest objects or walls.
•
Install the hanging bracket to the ceiling joist or structure that is capable of carrying a load of at least 38kg,
with two long screws provided. Ensure at least 30mm of the screw is threaded into the support. (Fig. 2)
NOTE: The bracket screws provided are for use with wooden structures only. For structures other
than wood, the appropriate screw type MUST be used. Ensure the screws used are suitable for the
mounting surface and the surrounding environment.
ANGLED CEILING INSTALLATION
This fan hanging system supports a maximum 8 degree angled ceiling
installation.
4 | P a g e
INSTALLING THE MOUNTING BRACKET
7
Lamp shade cover x1
8
Receiver & Remote x 1 Set
9
Battery x 2 & screw x2
10
Mounting screws x 2
38KG
Fig. 3
Fig. 2
Publicidad
