STEP 3 (For 48" range only)
Remove the rear wood brace (5) and the front metal securing
brackets (6).
5
6
STEP 4
Slide the range back just enough to allow the rear feet to be
installed.
4 - Installation Instructions
STEP 5
Slide back more and tilt back (9), putting the rear legs on the
floor and then mount the front legs (10) while in this angled
position supported by the rear legs and the skid.
9
STEP 6
Remove the base while supporting the front of the range (11)
and lower to the floor in a controlled manner (12).
11
EN
10
12
9