Publicidad
Idiomas disponibles
Idiomas disponibles
I N S T A L L I N G T H E R E F L E C T O R S
3.23
A
Fig. 3.23
Using a Philips screwdriver, install the front (white) reflector on the handlebar (Fig. 3.23
„
A) and the rear (red) reflector on the seatpost (Fig. 3.23 B).
A D J U S T I N G T H E C R A N K S
Both the Jett 20 and 24 multi-speed models have adjustable cranks. The bicycle is assembled
with the pedals in the shorter position on the crank arm and can be adjusted to be made
longer.
3.24
B
Fig. 3.24
Using the flat wrench, remove the pedal from the crank.
„
15 mm
16
Publicidad
