3.29
C
B
Fig. 3.29
Reconnect the front brake cable by squeezing the brake arms (A) together and inserting
the cable noodle end (B) into the quick release cradle (C).
Hold the front end of the bicycle up and give the front wheel a good spin. The
wheel should be centered within the fork crown and rotate freely and not
wobble. If the wheel wobbles and is not centered, please see you Authorized
Specialized Retailer.
19
3.30
Fig. 3.30
REMOVING THE REAR WHEEL ON MULTI-SPEED MODELS
Shift the bicycle into the highest (smallest) gear.
Disconnect the rear brake cable (Fig. 3.30) by squeezing the brake arms (A) together and
unhooking the cable noodle end (B) from the quick release cradle (C).
Using the flat wrench, loosen the rear wheel axle nuts.
B
C