Installation Specifications - urmet domus 1092/127 Manual De Uso

INSTALLATION SPECIFICATIONS

•
Avoid pointing the lens directly towards the sun or intense sources of light also when the camera is
off. The subject must not be backlight.
•
Some lighting systems (e.g. coloured fluorescent lights) may false the colours.
•
Arrange a suitable circuit breaker and fuse upstream of the devices.
•
Make sure that the rating plate data correspond to the power specifications before connecting the
device to the mains.
INSTALLATION
1. Make sure that no units are powered before starting the installation procedure.
2. Extract the protective dome and completely remove it from the base by inserting a coin into the
dedicated slit and rotating it.
3. Fasten the mount to the ceiling or other flat surface using the screws included.
4. Connect the video output to the utility.
5. Power the camera.
6. Adjust the angle "1", the slant "2" and the rotation "3" of the lens to frame the required images
correctly.
7. Insert the protective dome and fix it to the base (a "clack" sound confirms the dome has fastened
properly).
DS1092-014B
Power wire
Video input
Video output wire
1 2
Power unit
1092/800
3
2
1
3
5