Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
PRECAUTIONS
•
Make sure that the device is intact after removing it from the package.
•
Disconnect the device from the mains before cleaning or maintenance. Do not use spray products to
clean the device.
•
Check that the working temperature is within the indicated range and that the environment is not
particularly humid.
•
Do not touch the camera optics surface. Clean the surface with a soft cloth and methylated spirit in
the event of accidental contact.
•
Disconnect power by means of the circuit breaker in the event of a failure and/or bad operation.
•
The device can only be opened by qualified technical personnel.
•
Exclusively contact an authorised service centre for repairs.
TECHNICAL SPECIFICATIONS
Type of sensor:......................................................................................1/3" CCD - Colour - High resolution
Sensitive element: .............................................................................................................470000 total pixels
Optics: ..................................................................................................................Varifocal - F 1.5 - f 4-9 mm
Horizontal framing angle:.............................................................................................................. ~ 33°to~ 70°
Maximum slant angle:.................................................................................................................................. 85°
Scanning system: .............................................................. 2:1 interlaced - CCIR - V: 50 Hz - H: 15.625 kHz
Horizontal resolution:........................................................................................................................ 520 lines
Synchronisation: ...................................................................................................................................Internal
Shutter control: .................................................................................................... 1/50 ~ 1/10,000 sec (AUTO)
Back-lighting compensation:............................................................................................. Selectable ON/OFF
White balancing: ..................................................................................................................................... AUTO
Gain control: ..................................................................................................................... Selectable ON/OFF
Flickering reduction: ......................................................................................................... Selectable ON/OFF
Auto-Iris: ........................................................................................................................................... DC driver
Minimum luminosity: .................................................................................................... 0.3 Lux F=2 (AGC On)
Video output: ............................................................................................ composite output 1 Vpp, 75 Ohm
S/R ratio:................................................................................................................................................>48 dB
Power: ..................................................................................................................................... 12 VDC (±10%)
Consumption: ......................................................................................................................................150 mA
Working temperature range:........................................................................................................... -10 to 50°C
Storage temperature range: ........................................................................................................... -30 to 60°C
Dimensions (Ø x H): .................................................................................................................. 140 x 120 mm
Weight: .................................................................................................................................................... 270 g
ACCESSORIES PROVIDED
•
Fastening screws
•
Fastening mount
•
Circular frame
INSTALLATION SPECIFICATIONS
•
Avoid pointing the lens directly towards the sun or intense sources of light also when the camera is
off. The subject must not be backlight.
•
Some lighting systems (e.g. coloured fluorescent lights) may false the colours.
•
Arrange a suitable circuit breaker and fuse upstream of the devices.
•
Make sure that the rating plate data correspond to the power specifications before connecting the
device to the mains.
LBT7857
5
Publicidad
Tabla de contenido
