channeled into a condensates evaporation tray which is located in the back of the appliance
near the compressor. The heat produced by the compressor then evaporates the
condensates collected in the tray.
Shelves
▪
To prevent damage to the door seal, ensure that the door is fully open before
pulling out the shelves to add or remove bottles.
▪
For easier access to the contents of the shelves, slide the shelf out approximately
one third of the way. The shelves are, however, fitted with a stop to prevent the
bottles falling out.
▪
To remove or reposition the shelves, incline the shelf as indicated in the diagram,
then push or pull as required.
42