Publicidad
Idiomas disponibles
Idiomas disponibles
KAYAK PADDLE (* Optional )
Blade
KAYAK PADDLE ASSEMBLY
1. Press and align the push-bottom on the paddle blade with the short shaft hole, ensure the
push-bottom is securely snapped into the short shaft hole.
2. Join the 2 shafts together by pressing and aligning the push-bottom securely snapped
into the hole.
3. To disassemble, reverse the assembly steps.
Note: it is not necessary to detach the paddle blades from the shafts.
NOTE: ALWAYS DRAIN THE WATER LEFT IN THE PADDLE SHAFT AFTER EACH USE.
PADDLE ASSEMBLY
Shaft
11
Shaft
Blade
Publicidad
