Scope Of Delivery - Primo 1501 Instrucciones De Servicio

Primo 1501
Before changing the location,
cleaning or anything else other
than normal operation
turn off and unplug the paper
shredder!
Mainte nan ce and ser vi ce work
may be per for med on ly by:
• HSM cu sto mer ser vi ce
• spe cial ly trai ned staff
(e.g. qua li fi ed electri cians)
• ser vi ce tech ni cians from our
con tracting part ners

4. Scope of delivery

• Paper shredder, ready for connection, in
carton packing
• 5 Bags for shredded material
• Special cutting block oil 50 ml (cross cut)
• Operating instructions
Acces so ries:
• Bag for shredded material,
order No.: 1.661.995.050
• Special cutting block oil 250 ml,
order No.: 1.235.997.401
5. Installation
• This paper shredder should never be
placed near or over a radiator or heat
source.
• The ventilation slots must not be blocked
or covered and they must be at a distance
of at least 10 cm away from walls or furni-
ture.
• Make sure the mains plug is easily acces-
sible.
• Before plugging in the mains plug, check
that the voltage and frequency of your
local mains supply correspond to those
stated on the type plate.
8
Paper shredder
6. Put ting in to ope ra ti on
Switching the paper shredder on
• Press rocker switch pos. 1.
1
• Rocker switch locks in.
• Green LED lights.
• Paper shredder is ready for ope-
ration (standby).
Feed paper
See „Technical data" for sheet
capacity.
• The shredding pro cess is star ted
by a pho to –cell in the paper fee-
ding opening.
• When the paper fee ding opening
is free again, the cut ting sy stem
au to ma tical ly swit ches off af ter
app rox. 3 sec. and returns to
standby.
Swit ching paper shredder off
• Tap rocker switch pos. 2.
Rocker switch resets to zero
2
position.
english
0511