Publicidad
Idiomas disponibles
Idiomas disponibles
3. Safety
3.3 Improper use
WARNING!
Injuries through improper use
EN
Improper use of the instrument can lead to hazardous situations and injuries.
▶
▶
▶
This instrument has been designed and tested in accordance with the relevant
safety regulations for electronic measuring instruments. The trouble-free function
and operational safety of the instrument can only be guaranteed if the general safety
measures and the instrument-specific safety instructions given in this manual are
followed.
Improper handling of the interface adapter can damage the adapter itself. It is also
■
possible that your connected instruments may be damaged.
In this case, there can be no warranty claim.
The manufacturer accepts no liability for damage caused to their connected
instruments by the use of the interface adapter.
Observe standard regulations and safety rules for electrical, low-power and
■
high-power systems, especially any country-specific safety regulations.
Design the wiring particularly carefully when connecting to other devices (e.g. PC).
■
Under certain circumstances, internal connections in third-party devices (e.g. GND
connected to the ground) can lead to impermissible voltages that could compromise or
even destroy the function of the device itself or a device connected to it.
Do not use the instrument if it is not working properly. Device protection may be
■
compromised. If in doubt, have the instrument checked.
Do not use the instrument if it is damaged. Before using the instrument, check that
■
there are no cracks on the case or any missing plastic parts. Pay particular attention to
the insulation of the connectors.
If there is a possibility that the instrument can no longer be used safely, the instrument
■
must be switched off immediately and marked accordingly to prevent reuse.
Any use beyond or different to the intended use is considered as improper use.
Do not use this instrument in safety or emergency shutdown devices.
8
Refrain from unauthorised modifications to the instrument.
Do not use the instrument within hazardous areas.
Observe the operating parameters in accordance with chapter
8
"Specifications".
WIKA operating instructions, model USB6300
Publicidad
