Publicidad
STEP 2B Attach Wall Plate
CAUTION:
Avoid potential personal
injury or property damage!
● Mount the arm assembly
onto the concrete surface (no surface
covering)
● Minimum solid concrete thickness:
8 in. (20.3 cm)
● Minimum concrete block size:
8 x 8 x 16 in. (20.3 x 20.3 x 40.6 cm)
2
DRILL
2X
Never drill into the mortar
CAUTION:
CAUTION:
between blocks.
5
SECURELY TIGHTEN
07
08
CAUTION:
Avoid potential personal injury or property damage!
Both lag bolts
MUST BE firmly tightened to prevent unwanted
07
movement of arm assembly
fastened to the wall before continuing on to the next step.
1
directly
06
3
3
3 in. (7.5 cm)
3/8 in.
(10 mm)
06
2X
. Ensure the wall plate is securely
06
Solid Concrete or Concrete Block Installation
POSITION TEMPLATE
To calculate your precise wall plate location, check out our HeightFinder at
TIP:
TIP:
sanus.com [www.sanus.com/1172].
INSERT ANCHORS
2X
Be sure the anchors
CAUTION:
CAUTION:
flush with the concrete surface.
TIP: You can make small
level adjustments by loosening
the bottom lag bolt
shifting the wall plate until level.
05
4
09
14
06
are seated
09
6
07
06
and
07
Visit
HeightFinder™
sanus.com
/1172
REMOVE COVERS
P
P
INSERT COVERS
P
P
7
Publicidad
