i.safe MOBILE IS330.2 Manual De Instrucciones página 14

CONNECTING APPROVED ACCESSORIES
Only connect accessories approved by i.safe MOBILE to the device. Accessories approved by
i.safe MOBILE can be found at www.isafe-mobile.com/en/products
Approved accessories can be connected to any 13-pin ISM interface and to the USB interface.
DANGER
Improper use can result in death or severe injuries! If you need approved accessories in
explosion hazardous areas, please note the following before connecting:
Connect approved accessories to the 13-pin ISM interface of the device only outside of
explosion hazardous areas.
Operate approved accessories in explosion hazardous areas only on the 13-pin ISM interface
of the device. Wired connections via the USB interface are prohibited.
Connect the plug of the accessory securely to the 13-pin ISM interface on the device.
Close the 13-pin ISM interface with the cover provided when you are not using accessories.
13-PIN ISM INTERFACE
Loosen the screw on the 13-pin ISM interface cover using the Screwdriver included in the
accessory package and remove the cover as shown.
Connect the plug of the approved accessory to the 13-pin ISM interface as shown.
Hand-tighten the screws.
Check that the plug is seated correctly and securely.
14