Descargar Imprimir esta página

TFA 60.2033.10 Instrucciones De Uso página 11

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 23
TFA_No. 60.2033_Anleitung
Digital alarm clock with induction charger
8.2 Charging via USB
• This product also provides a USB charging port for devices that do not support
wireless charging.
• Plug the USB-A cable (not included) into the USB port on the alarm clock and con-
nect the other end to your mobile device. Make sure that the charging rate is suit-
able for your mobile device. Do not apply excessive force when connecting a USB
cable. The USB plug fits only one way into the USB port.
9. Troubleshooting
Problem
Solution
No display
Operation with power adapter
➜ Connect the device to the power adapter
➜ Check the power adapter
Battery operation
➜ Ensure the batteries' polarities are correct
➜ Change the batteries
➜ Press any button
➜ Connect the device to the power adapter
No charging function
➜ QI CHARGER ON/OFF switch to ON
(wireless)
➜ Mobile device is not Qi compatible
Indicator light does not
➜ Position the mobile device properly
appear or red LED flashes
➜ Use the control knob to slide the charging coil
➜ Remove metallic objects
➜ Remove the cover
➜ Use USB port
➜ Connect the device to the power adapter
No charging function (USB)
➜ Check the USB port connection
If your device fails to work despite these measures, please contact the retailer where
you purchased the product from for advice.
10. Waste disposal
This product and its packaging have been manufactured using high-grade materials and
components which can be recycled and reused. This reduces waste and protects the
environment.
Dispose of the packaging in an environmentally friendly manner using the collection
systems that have been set up.
Disposal of the electrical device
Remove non-permanently installed batteries and rechargeable batteries
from the device and dispose of them separately.
This product is labelled in accordance with the EU Waste Electrical and
Electronic Equipment Directive (WEEE).
08.08.2022
11:43 Uhr
Seite 11
– 20 –
Digital alarm clock with induction charger
This product must not be disposed of in ordinary household waste. As
a consumer, you are required to take end-of-life devices to a designated
collection point for the disposal of electrical and electronic equipment,
in order to ensure environmentally-compatible disposal. The return
service is free of charge. Observe the current regulations in place!
Disposal of the batteries
Never dispose of empty batteries and rechargeable batteries with ordi-
nary household waste. They contain pollutants which, if improperly dis-
posed of, can harm the environment and human health.
As a consumer, you are required by law to take them to your retail store
or to an appropriate collection site depending on national or local regu-
lations in order to protect the environment. The return service is free of
charge.
The symbols for the contained heavy metals are:
Cd=cadmium, Hg=mercury, Pb=lead.
12. Specifications
Power consumption
Power supply (included)
Input: 100-240V AC 50/60Hz 1.0A Max
Output: 9,0 V DC 2.5A, 22.5W
Average active efficiency: ≥85.96%
No-load power consumption: ≤0.10 W
2 x 1,5 V AAA batteries (not included)
Use alkaline batteries
Charging output
USB-A port (1A)
Transmission frequency
110KHz~148KHz
Wireless charger power output 10 W
Housing dimension
107 x 83 x 160 mm
Weight
221 g (device only)
– 21 –

Publicidad

loading