Pairing
Press OK and BACK buttons together, hold for 3 seconds and release,
•
press the buttons to check if they can work well.
•
If pairing failed, RC will enter sleep model after 25 seconds without
operation.
MOUSE function
•
The default status for air mouse is OFF, press button to turn on/off air
mouse.
•
RC will enter low power consumption status if no operation within 20
seconds.
•
If the arrowhead was found drift on the screen, leave it on the horizontal
surface for 3 seconds to adjust automatically.
Note: The operation of some function keys may depend on their availability
in the operating system in which the controller is connected
Technical specs:
- 2.4GHz (2404MHz – 2479MHz) / 10mW
- GFSK modulation
- Power : CR2032 battery (not included)
In the case of inactivity for a long time, remove the batteries and store the
USB receiver.