Descargar Imprimir esta página

bort medical 215 700 Instrucciones De Uso página 10

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 16
EN
6
Information for technicians: The illustrations in the fitting instructions
depict the fitting on the right-hand side. When fitting on the left-hand
side, the stabilisation element has its course mirrored.
For initial fitting, the stabilisation element is fixed once-only on the back
between the waist and shoulder strap by the technician in the medical store.
Therefore, the stabilisation element should not be placed directly centrally
on the spine, but slightly offset to one side. The element also remains on the
brace when it is removed, this simplifies putting it on again.
Removal
The brace is only removed by opening the Velcro fasteners on the arm pouch
and the quick-release fastener. The stabilisation element guarantees easy
fitting when further used.
Material composition
Polyamide (PA), polyurethane (PUR), polyester (PES), elastane (EL), cotton (CO)
The sewn in textile label provides the precise material composition.
Cleaning information
Delicate wash 30 °C
Do not iron
Do not use fabric conditioner. Close the Velcro fastening to avoid damage to
other laundry items.
Guarantee
The legal regulations of the country in which you acquired the product
apply to the purchased product. Please contact your specialist retailer if
you suspect a warranty claim. Please clean the product before submitting a
warranty claim. If the enclosed instructions for use have not been properly
observed, the warranty may be impaired or cancelled. The warranty does not
10
Do not bleach
Do not clean chemically
Do not dry in a tumble dryer

Publicidad

loading