LOCATION
1. Place the unit on a firm, level surface in an area with at least 20cm of free space around it to allow
for proper air circulation.
2. Never install the unit where it could be subject to:
Heat sources such as radiators, heat registers, stoves or other products that products that produce
➢
heat.
In an area where oil or water may be splashed
➢
Direct sunlight
➢
➢
Mechanical vibration or shock
Excessive dust
➢
Lack of ventilation, such as cabinet or bookcase
➢
Uneven surface
➢
WARNI
NG!
NOTE!
Install the unit in rooms which exceed 8 m².
Do not install the unit in a place where inflammable gas may leak.
The manufacture may provide other suitable example or may provide
additional information about the refrigerant odour.
51