Publicidad
Idiomas disponibles
Idiomas disponibles
Cautions!
Drain the water completely when water tank is full and reset your setting.
•
•
If the water tank is dirty, clean it by cool or warm water. Don't use cleaner, steel wool, chemical rag duster,
gas oil, benzene, thinner or other solvent to clean it, otherwise, it will damage the water tank and lead to
leakage.
•
Please use two hands to put the water tank into the machine correctly, or the water full indicator will still
show red and the machine cannot work.
Continuous drainage
1. Open the cover on the back of the dehumidifier
2. Take out the water tank
3. Insert a PVC pipe with 9.5mm (inner diameter 9.5mm), and the recommended length is 300mm; put the other
side into a container, such as a bucket.
NOTE: PVC pipe is included in the package
2. Empty the water tank
Do not remove the float from the water tank;
•
otherwise, the machine will not stop working when
the water tank is full. Then the water will be
overflow that maybe make damage to your floor.
56
Publicidad
