Mafell LO65 Ec Traducción Del Manual De Instrucciones Original página 19

2.3 Technical data
Universal motor
Input power continuous operation
Milling depth adjustment with fine
adjustment
Revolving depth control turret
Tool fastening:
with collets
or with adapter for router bit
Idling speed
Connection diameter at extraction hood
Weight without mains cable
2.4 Emissions
The declared noise emission values have been measured in accordance with DIN EN 62841-1 and may be used
for comparing the tool with another and also in a preliminary assessment of exposure.
2.4.1 Noise emission specifications
Noise emission values determined according to EN 62841-1 and EN 62841-2-17:
Sound pressure level
Uncertainty
Sound power level
Uncertainty
The noise measurement was recorded using the tool included in the standard equipment.
2.4.2 Vibration specifications
The typical hand-arm vibration is 3.3 m/s
2.5 Scope of supply
Router LO 65 Ec MaxiMax
Art.-No. 91C701, 91C720, 91C721
1 parallel stop
1 template guide Ø 30 mm
1 collet Ø 8 mm (Ø 1/2" - GB)
Danger
The noise emissions during actual use of the power tool can differ from the declared
values depending on the ways in which the tool is used especially what kind of
workpiece is processed.
Always wear hearing protection, even when the power tool ist running idle in addition
to the trigger time!
.
2
230 V~, 50 Hz
2600 W
0 - 65 mm (0- 17/16 in.)
3-stage
Ø 6 – 12 mm and Ø 1/2"
M 12 x 1 (M 10)
10000 - 22000 rpm
35 mm (1 3/8 in.)
6,9 kg (15.2 lbs)
L = 71 dB (A)
PA
K = 3 dB (A)
PA
L = 82 dB (A)
PA
K = 3 dB (A)
PA
LO 65 Ec MidiMAX
(specially suited for template milling)
Art.-No. 91C750, 91C751
1 template guide Ø 30 mm
1 adapter for router bit M 12 x 1
-19-