A&D FG-D-CWP Guia De Inicio Rapido página 9

5.3. Error Code Table
When any of the following errors are displayed, try turning the display off and on again.
Display
is displayed
is displayed
is displayed
is displayed
6. Specifications
Specifications are subject to change without notice.
Input sensitivity
Input signal range
Load cell excitation voltage
Load cell drive capacity
Temperature coefficient Zero
Temperature coefficient Span
linearity
Maximum display resolution
Display
Display update
Operating Consitions
Power Supply
Dimensions
Weight (approximately)
EN
The temperature sensor has failed.
The memory (circuit) has failed.
The internal circuitry has failed.
The mass sensor has failed.
0.1 μV/d min. (d: minimum division)
-16 mV to 16 mV
5 V ± 10 %
Up to 4 x 350 ohm loadcells
±0.02 μV/°C typ. ±0.1 μV/°C max.
±3 ppm/°C typ. ±15 ppm/°C max.
±0.01 % of full scale
100000
7 segment LCD with backlight (Character height 30 mm)
Approx. 10 times/second
-10 °C to 40 °C, 85 % R.H. or less (non-condensing)
AC adapter or mobile battery or USB port
USB Cable Length: Approx. 3 m
(USB cable is also used for communication.)
Width 240 mm × Depth 76 mm × Height 155 mm
1.6 kg (Includes stand)
9
Content