Sanitaire SC600 Serie Manual Del Propietário página 5

CAUTION
!
Make sure vacuum cleaner is turned
off and unplugged.
How to clear a blockage
Problem solving
CAUTION: Always unplug vacuum cleaner before servicing.
!
Motor will not start
Vacuum cleaner
does not clean
Vacuum cleaner is
hard to push
There is a clog
There is a
burning smell
There is dust leaking
Any other maintenance or servicing not
included in this manual should be
performed by an authorized service
representative.
1
2
Screw
Turn power switch to on.
Push plug securely into outlet.
Try another outlet.
Adjust carpet height setting to lower position.
Check for clogs that restrict the air flow.
Check for worn or broken belt and replace if necessary.
Adjust carpet height setting to higher position.
Remove bottom metal plate. Check for clog in base
and / or brushroll. See above.
The belt may be damaged or something may be caught in
the brushroll.
Check brushroll and remove any obstruction.
Replace belt.
Make sure clamp on bag is secure. Refer to pg. 4.
Fan
1-800-800-8975 5
Cam locks
Bottom metal plate
Screw
Fan chamber