Publicidad
Idiomas disponibles
Idiomas disponibles
How to use
How to use
Before use
Preparation for use
1. Standby time
Once the refrigerator is properly installed and cleaned, do not turn it on immediately. Be sure to turn on
the refrigerator after more than 1 hour of inactivity to ensure normal operation.
2. Cleaning
Check the accessories inside the refrigerator and wipe the inside with a soft cloth.
3. Switch on
Plug the power plug into the power socket to switch on the compressor. After 1 hour, open the refrigerator
door, if the temperature inside the refrigerator compartment drops noticeably, it means that the cooling
system is working normally.
4. Food storage
After the refrigerator has operated for a period of time, the internal temperature of the refrigerator will be
automatically controlled according to the user's temperature setting. Once the refrigerator has cooled
down completely, place the food, which normally needs 2 to 3 hours to cool down completely. In sum-
mer, when the temperature is high, it takes more than 4 hours for the food to cool down completely (try
to open the refrigerator door as little as possible before the internal temperature drops).
Temperature setting
The temperature can be set by pressing the "SET" key. Each time the "SET" key is pressed, the indicator of
the current mode goes out while the indicator of the next mode lights up, validating that mode setting if
no operation is performed with the keys within 5s (otherwise, the mode setting will be invalid). Once the
setting takes effect, the temperature shall be immediately controlled according to the mode setting.
The cycles of the temperature modes are as follows:
"2-->4-->5-->6-->8-->FAST COOL-->2"
When the temperature mode is not changed, adjust the air regulator from left to
right so that the refrigerator temperature decreases and the freezer temperature
increases, otherwise, adjust the air regulator from right to left so that the refrige-
rator temperature increases and the freezer temperature decreases. It is recom-
mended to set the air regulator in the middle position.
If a lower freezer temperature is desired, adjust the air regulator to the left, so that
the freezer temperature decreases and the refrigerator temperature increases.
When the temperature is set as desired, adjust the air regulator back to the centre
position. The refrigerator thermostat and the air regulator must be used together.
Coldest
2
4
5
6
8
Cold
It is used when the user needs the col-
dest temperature.
For normal use
Used when the user does not need a very
cold temperature.
32
English
infiniton.es
Publicidad
