Publicidad
Idiomas disponibles
Idiomas disponibles
Installation
8. Attach the upper duct covers (A) to the duct cover
supports using 2 - 3.5 x 6.5 mm screws (included with
the hood) on the slots (B) using the Torx 20 adapter.
NOTE
The slotted holes in the upper duct covers will be visible
when assembled, and can be hidden down inside the
lower duct covers.
4
ENGLISH
9. Complete the duct cover installation by placing lower
B
A
10. Be sure the covers fit over the hood canopy slots (D).
The installation height above the counter top should
be considered. Cutting and modification of one duct
cover may be required to fit various ceiling heights. Any
modifications should be done by a professional installer
using suitable safety devices and observing the proper
safety recommendations.
duct covers.
C
NOTE
C
D
Publicidad
