Publicidad
Idiomas disponibles
Idiomas disponibles
Safety information
¾ Only use replacement guide bars and saw
chains specified by the manufacturer. Incorrect
replacement guide bars and saw chains may
cause chain breakage and/or kickback.
¾ Follow the manufacturer's sharpening and
maintenance instructions for the saw chain.
Decreasing the depth gauge height can lead to
increased kickback.
General chain saw safety warnings
¾ Follow all instructions when clearing jammed
material, storing or servicing the chain saw.
Make sure the switch is off and the battery
pack is removed. Unexpected actuation of the
chain saw while clearing jammed material or
servicing may result in serious personal injury.
Residual risks when using the device:
Even when the power tool is used properly, there
will always be certain residual risks which cannot
be excluded.
¾ Contact with the unprotected saw chain (cut
injury)
¾ Ejection of parts of the saw chain
¾ Ejection of parts of the cut material
¾ Damage to hearing
¾ Inhalation of particles of cut material
¾ Contact with oil
It is therefore mandatory always to use this device
with the additional personal protective equipment,
as illustrated and described in this operating man-
ual, and to follow the safety instructions.
Safety information for pole saws
¾ Keep all body parts away from the cutting
tool. Do not attempt to remove cut twigs or
foliage or hold material to be cut when the
chain is running. Only rectify a chain jam
when the tool is switched off. One moment of
inattentiveness when using the device can result
in serious injuries.
¾ Carry the pole saw by the handle with the
chain stationary. Always fit the protective
cover when transporting the pole saw or
putting it away for storage. Careful handling of
the tool reduces the risk of injury from the chain.
¾ Only hold the power tool by the insulated
handles, because the cutting chain can come
into contact with hidden power cables or even
its own power cable. Contact of the cutting tool
with a live cable may conduct voltage to metallic
tool components resulting in an electric shock.
Safety information
¾ Chain and cutting bar form the cutting
set. Only cutting sets approved by the
manufacturer can be used for a particular
tool. Pairing of components that are not
matched to each other, can result in injuries and
irreparable tool damage. Chains and bars made
by different manufacturers must not be combined
and used.
¾ Check the tool for damage before every use
or after a shock or impact. The tool must be
repaired by a specialist workshop before it is
placed in service again.
Protection of yourself and others
¾ Do not let children or persons who have not
read these usage instructions use the device.
The minimum age of users may be defined by
local or national legislation.
¾ Do not operate the device if there are people
(especially children) or animals in immediate
proximity. Ensure children do not play with the tool.
¾ Stop using the device if persons (especially
children) or animals are nearby.
¾ This device must not be used by children
or persons with reduced physical, sensory
or mental capabilities or with inadequate
experience and knowledge. Likewise persons
must be familiar with this instruction manual
before using the device. The minimum age for
using the device may be specified by local or
national legislation.
¾ Only switch the motor on if your feet and
hands are at a safe distance from the cutting
element.
¾ Always disconnect the device from the power
supply if you are leaving it unattended or
removing a blockage.
¾ Always wear slip-resistant shoes and long
trousers as well as other appropriate personal
protective equipment (safety glasses, ear
defenders, safety gloves, safety helmet, etc.)
when working with or on the pole saw.
Wearing personal protective equipment reduces
the risk of injuries.
Do not wear loose clothing, etc., which could be
caught by the cutting tool.
Before use
¾ Before use, make sure you are familiar with
the tool, its functions and controls.
¾ Do not use any tool whose switch is defective
and which can no longer be switched on or
off. It must be repaired by a qualified expert or
workshop.
EN
25
Publicidad
