Publicidad
Idiomas disponibles
Idiomas disponibles
Safety information
¾ Removal of the protective equipment must
only be performed with the motor stationary
and the operating arm removed.
¾ Ensure that ventilation slots are free from dirt.
¾ Do not clean the device with water.
¾ Store the device in a secure location.
¾ Store the device out of reach of children.
¾ Let the device cool down before putting it
away and/or storing it.
¾ Always fit the protective cover after use and
when not using.
General safety information
¾ Spare parts must meet the requirements of
the manufacturer. Therefore, use only original
spare parts or those spare parts authorised by
the manufacturer. During replacement, always
observe the supplied fitting instructions and
always remove the operating arm from the device
prior to use.
¾ Repairs must only be performed by a qualified
technician or service centre. Specialist
workshop addresses can be found on our website.
Intended use
This tool is intended solely
- as a pole saw for pruning or cutting back branches
on high trees.
- for use in accordance with the descriptions and
safety instructions given in this operating manual.
The pole saw is not designed for commercial
use and may only be used in home gardens and
allotments.
Any other use is classed as an unintended use.
The user is liable for any damages arising from
unintended use.
Identification plate
Position
The identification plate is located on the casing of
the tool.
Note
The label has the status of a certificate. It
must never be altered or obliterated.
Safety information
¾ This pole saw is intended for the care of trees in
private households. The device must not be used
for purposes other than those intended because of
the risk of bodily injury to the user or other persons.
¾ Only use the power packs intended for this
purpose in power tools. Use of other power
packs can result in injuries and fires.
¾ Regularly check all screw or bolt joints to
ensure they have not come loose.
¾ Ensure maintenance work is always
performed to schedule. This ensures that the
safety of the power tool is maintained.
¾ Switch the device off and wait until the cutting
tool comes to a standstill before removing the
operating arm.
¾ Replace all worn or damaged information
signs on the device.
¾ Even if all safety and operating instructions
are heeded, there is always a residual risk of
injury and property damage. Always remain
aware of this.
Structure O
1 Manufacturer
2 Device group
3 Model name
4 Rated voltage, current type
5 Weight
6 Rated size of the guide bar
7 Disposal note
8 Year of manufacture
9 Guaranteed sound level
10 CE label
11 Model number
12 Serial number
Operating controls P
1 On/off switch on handle
2 Lock-on switch
3 Handle
4 Oil fill level indicator
5 Protective cover
6 Cutting bar
7 Saw chain
8 Oil tank cap
9 Adjusting wheel
10 Locking screw
11 Operating arm *(with permanently installed power pack)
12 Holding area for the hand / fastening area for the optional
middle handle
*Necessary operating element (not supplied)
Operating controls
EN
27
Publicidad
