VOX electronics MX-1080 Manual Del Usuario página 5

HAND/STAND MIXER USE
Clean the beaters before first use. Before assembling the mixer, make sure the power cord is
unplugged from the wall outlet and the speed selector is in the "0" position.
1. Choose the proper attachments depending on the task and assemble them in proper position.
Beaters are used for egg white or other liquid mixing.
2. Select the setting and then plug in the appliance into wall outlet.
3. Turn the speed selector to your desired setting and the appliance will start operating. There
are 6 settings and the speed will achieve its highest any time the turbo button is pressed.
Warning: Do not place knifes, metal spoons, forks and similar into the bowl while the
appliance is operating.
4.The maximum operation time per one use shall not exceed 4 minutes, then rest leave the
appliance rest for appropriate time until it cools between two consecutive cycles. When
kneading yeast eggs, we suggest the speed selector should be firs positioned at low speed and
then increase the speed to achieve the best results.
5.When mixing is completed, turn the speed selector to 0 position and unplug the cord from
wall outlet.
6. Lift the head of the mixer, hold the beaters/dough hooks with one hand, press the ejector
button firmly down with your other hand and remove the beaters.
Note: Remove the beaters only when the appliance is at the 0 setting.
CLEANING AND MAINTENANCE
1. Unplug the appliance and wait until it is completely cooled before cleaning it.
CAUTION: The mixer cannot be immersed into water or other liquid.
2. Wipe the outside surface of the head with a damp cloth and polish with a soft dry cloth.
3. Wipe any excess food particles from the power cord.
4. Wash the beaters and dough hooks in warm soapy water and wipe them with a dry cloth.
The beaters and dough hooks may be washed in the dishwasher.
3