Descargar Imprimir esta página

JBL 4329P Manual Del Propietário página 8

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 37
8. Other Modes
Protection Mode
The 4329P system is provided with different levels of protection, in the rare event that the system
detects and internal malfunction, it will be represented by the selected Source icon to illuminate
solid Red color. The system will remain in that state for as long as the protection event is present.
(The example to the right, an issue has resulted while the Optical input was selected.)
Software Upgrades
Software upgrades are automatic, as long as the system is connected to an active network.
If a valid update is available, the unit will automatically start the update process which will be
indicated by the Power LEDs to illuminate and flash Purple in color.
When completed, the Power LEDs will return to previous status and normal operation will
resume.
Speaker Detection
When powered, if the 4329P system does not detect wireless or wired connectivity between the
Primary and Secondary speakers, Both Power LEDs will illuminate solid Yellow color.
Check your connections as outline in the Speaker System Set-up in Section 4.
(The example to the right shows no associated speaker detected and primary speaker connected
to a network.)
Tethered High Resolution Audio Mode – 192kHz / 24bit Connection
When a wired / tether connection via the Digital Link / Cat5e cable is detected between the
Primary and Secondary speaker, Both Power LEDs will illuminate in solid White color.
Wireless Audio Mode – 96kHz / 24bit Connection
When the Primary and Secondary speaker are connected wirelessly, Both Power LEDs will
illuminate in solid Green color.
MQA Content
The 4329P system supports MQA (Master Quality Authenticated) technology, as such has the ability to
playback MQA audio streams.
When Streaming source has been selected and an MQA file has been detected in playback, the Streaming
source LED will indicate the type of MQA file being played back by the following color changes:
Streaming Source LED illuminated in solid Green = Genuine MQA file
Streaming Source LED illuminated in solid Blue = MQA Studio
Streaming Source LED illuminated in solid Magenta = MQB and is only rendering.
4329P OM | Part No: 950-0628-001 | Rev 1.0 20221201
© 2023 HARMAN International Industries. Incorporated All rights reserved.
Solid
Primary Speaker
POWER
SOURCE/PAIRING
VOL
UME
/
MUTE
FLASHING
Primary Speaker
POWER
VOLUME
SOURCE/PAIRING
FLASHING
Secondary Speaker
POWER
Primary Speaker
VOLUME
SOURCE/PAIRING
Secondary Speaker
POWER
Primary Speaker
POWER
VOLUME
SOURCE/PAIRING
Secondary Speaker
POWER
POWER
VOLUME/MUTE
SOURCE/PAIRING
Secondary Speaker
POWER
Pg 8 of 11
EN
NET
NET
NET
NET
NET

Publicidad

loading