Publicidad
Idiomas disponibles
Idiomas disponibles
INSTRUCTIONS ON ASSEMBLY AND USE
EN
CONGRATULATIONS ON
PURCHASING THIS PRODUCT!
Please read these instructions carefully. The instructions are an integral
component of the product. Therefore, please store them and the packaging
carefully in case questions arise in the future. Please always include these
instructions when handing on the product to a third party. This product
must be assembled by an adult. This product is designed for private / do-
mestic use only. This product is not designed for commercial / industrial
use. The use of the product requires certain capabilities and skills. Always
adjust according to the age of the user and use for the purpose it has been
designed for.
TECHNICAL SPECIFICATIONS:
Item:
Stand Basketball Set Competition Pro
Item number:
71646
Weight:
24,5 kg
Height-adjustable: 230 – 305 cm
Purpose:
Portable training rack for basketball throwing exercises.
If you have assembly problems or would like further information on the
product, we have all you need and more at http://www.hudora.de/.
CONTENTS
1 x Basketball stand (cf. parts list on page 2) | 1 x These instructions
Other items included are meant to facilitate safe transportation and are not
required for the installation and use of the product.
SAFETY INSTRUCTIONS
• Place the basketball stand on a firm and level surface and make sure this
piece of equipment is positioned securely and firmly.
• Check that all connections have been tightly fastened before using the
basketball stand and check again later!
• Always fill the counterweight bag with sand, so that the stability of the
basketball stand is assured and it cannot fall forwards. Use the supplied
sandbags in order to protect the bag.
• This training equipment is NOT a toy!
• Never allow children to play in the immediate proximity of this piece of
training equipment without supervision and never let them assemble it.
• Never use the basketball stand near water or leave it outside in the rain.
• Wear suitable clothing when training. The clothes must be constituted in
such a way that they cannot catch in anything during the training due to
their fit.
• Always wear training shoes, and never train in bare feet, or when wearing
sandals, socks or stockings.
• Never wear jewellery which could catch in the basketball basket.
• Do not climb up the basketball stand.
• Do not hang off the basket or make slam dunks, the basketball stand
could tip over.
• If you start to feel unwell, discontinue training immediately.
• Only suitable for outdoor use.
• When permanently irradiated with UV light, the material ages significant-
ly faster. To avoid premature aging and thereby extend the service life,
you should always store the product in a dry and dark place when not in
use. Do not permanently expose the product to wind, moisture, extreme
temperatures or sunlight.
TOOLS REQUIRED
• 13 mm hexagon wrench key
• 6 mm Allen screw key
• Rubber hammer (not included in the delivery)
INSTRUCTIONS ON ASSEMBLY
NOTICE:
The product must be assembled by 2 adults.
Step 1:
Screw the lower vertical tube (2) with the screws (11), washers (12) and
nuts (13) on the base frame (1). (Fig. 1)
All images are examples of the design.
Step 2:
Connect the base frame (1) and the lower vertical tube (2) with the diagonal
struts (3). You should for this purpose use the screws (15) on the base
frame, the screws (14) at the upper end of the struts, as well as the washers
(12) and nuts (13). (Fig. 2)
Step 3:
Insert the supports (9 + 10) through the prefabricated loops of the weight
pocket (23) and then into the sleeves of the base frame. The three sandbags
(24) are used as to fill the weight pocket. Then assemble the textile base
cover (22) on the front part of the base frame. (Fig. 3)
Step 4:
Mount the net (19) onto the basket ring (4). (Fig. 4)
Step 5:
Connect the basket ring (4), backboard (5) and rear connecting tube (6) to
each other. You should for this purpose use the screws (16), as well as the
washers (12) and nuts (13). (Fig. 5)
Step 6:
Connect the middle and upper vertical tube (8 + 7). You should for this pur-
pose use the screws (17), as well as the washers (12) and nuts (13). (Fig. 6)
Step 7:
Plug the connecting tube from basket and backboard (6) onto the upper
vertical tube (7) and screw it tight at the desired height. The height can
be varied between 230 and 305 cm. You should for this purpose push the
connecting tube (6) to the desired height, so that the pre-drilled holes are
superimposed. You can now firmly screw the connecting tube (6) onto the
upper vertical tube (7) with the screws (18), as well as the washers (12) and
nuts (13). (Fig. 7)
Step 8:
Connect the lower with the middle vertical tube (2+8). You should for this
purpose use the screws (17) as well as the washers (12) and nuts (13).
(Fig. 8)
Step 9:
Mount the textile covers (25 + 26) onto the middle vertical tube (8) as well
as onto the base frame. (Fig. 9)
Transport:
When filled with sandbags, the stand is very heavy and weighs up to 115 kg.
You should remove the sandbags in advance, in order to be able to move
the stand. You need a helper who should raise the front end of the foot while
you concomitantly pull the rod towards you, as illustrated (Fig. 10). Once the
weight has been shifted onto the transport rollers, you can roll the basketball
stand to the desired location. Please note that frequent transport may dama-
ge the stand or the frame structure, due to the heavy weight.
MAINTENANCE AND STORAGE
Use a dry or damp cloth only to clean the product; do not use special clea-
ning agents! Check the product for damage or traces of wear and tear be-
fore and after each use. Do not make any structural changes. For your own
safety, please use original spare parts only. These can be sourced from
HUDORA. If parts become damaged or if sharp edges or corners should
develop, the product may not be used any more. If in any doubt, please
contact our service team (http://www.hudora.de/). Store the product in a
safe place where it is protected from the elements, cannot be damaged, and
cannot injure anyone.
DISPOSAL ADVICE
At the end of the product's life, please dispose of it at an appropriate colle-
ction point provided in your area. Local waste management companies will
be able to answer your questions on this.
SERVICE
We make every effort to deliver faultless products. If faults do arise ho-
wever, we put just as much effort into rectifying them. Therefore, you can
find numerous information on the product, replacement parts, solutions to
problems and lost assembly manuals at http://www.hudora.de/.
9/16
Publicidad
