Chauvet DJ 4BAR Quad ILS Guía De Referencia Rápida página 4

AC Power
This product has an auto-ranging power supply that works with an input voltage range of 100 to 240 VAC, 50/60 Hz.
To eliminate wear and improve its lifespan, during periods of non-use completely disconnect the
product from power via breaker or by unplugging it.
Fuse Replacement
1. Disconnect the product from power.
2. Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
3. Pry the safety cap out of the housing.
4. Remove the blown fuse from the clip on the front of the safety cap and replace with a fuse of the exact same type
and rating.
5. Re-insert the fuse holder and reconnect power.
Mounting
Before mounting this product, read the
Mounting Diagram
Mounting clamp (x2)
(such as CLP-15 from Chauvet)
Hanging
bracket (x2)
Control Panel Description
Button Function
<MENU> Exits from the current menu or function
<UP> Navigates upwards through the menu list and increases the numeric value when in a function
<DOWN> Navigates downwards through the menu list and decreases the numeric value when in a function
<ENTER> Enables the currently displayed menu or sets the currently selected value into the selected function
4BAR Quad ILS QRG Rev. 3
QUICK REFERENCE GUIDE
Safety Notes.
Safety cable
(such as CH-05
from Chauvet)
Tripod
mounting point
Clamp hanging
bolt (x2)
Pod pan
adjustment
adjustment knob
knob (x4)
EN
Pod tilt
(x2 per pod)
2