13. Technical Specifications WIRELESS RECEIVER (Monitor)
Display
Video Format
Compression Format
Video input / Video output
Audio input / Audio output
Frame rate
Memory card
Transmission range
Power supply
Operating temperature
Weight / Dimensions
14. Important Safety Notice
Only use the DC CONVERTER provided. The manufacturer isl not responsible for any
losses caused by DC converter not provided by the manufacturer. Do not touch the
DC converter with conductors (e.g. rings, etc.). Only use the socket match with the DC
converter. Use of improper socket may cause electrical and fire damage.
BATTERY: Always fully (!) recharge the battery before use. It must be fully discharged
before charge it again. Over charge and over discharge will shorten its life span. If the
usage period of a fully charged battery will become shorter and shorter, you need to
change it (its life will be shorten from the time it is being used).
Hints for Environment Protection: Packages materials are raw materials and can be
recycled. Do not disposal old devices or batteries into the domestic waste. Cleaning:
Protect the device from contamination and pollution (use a clean drapery). Avoid using
rough, coarse-grained materials/solvents/other aggressive cleaner. Wipe the cleaned
device. Important Notice: Should battery fluid leak from a battery, wipe the
battery-case with a soft cloth dry. Distributor: Technaxx Deutschland GmbH & Co.KG,
Kruppstr. 105, 60388 Frankfurt a.M., Germany
7" TFT LCD
NTSC / PAL
MPEG-4
4CH wireless single / 1 composite output
4CH wireless single / 1 composite output
640 x 480 VGA with 20fps
320 x 240 QVGA with 25fps
MicroSD card up to 32GB
≥ 200m (open range)
DC 12V / 1A
approx. 0°C up to +50°C
395 g / (L) 20,0 x (W) 12,0 x (H) 2,0 cm