Maxx 21038 Manual De Usuario página 38

5. FOR SAFE OPERATION
1. THIS MACHINE CAN CAUSE
SERIOUS INJURIES. Read this manual
carefully until you completely
understand and follow all safety
and operating instructions.
Also, know how to stop the
machine quickly in an emergency.
2. Keep this manual handy so that you
may refer to it later whenever any
questions arise. Also note, if you
have any questions which cannot
be answered herein, contact the
dealer from whom you purchased
the product.
3. Always be sure to include this
manual when selling, lending,
or otherwise transferring the
ownership of this product.
4. Never allow children or anyone
unable to fully understand the
directions given in the manual
to use the machine.
WORKING CONDITION
1. When using the product, you
should wear proper clothing
and protective equipment.
(1) Helmet
(2) Ear protectors
(3) Protection goggles or face
protector
(4) Thick work gloves
(5) Non-slip-sole work boots
2. And you should carry with you.
(1) Attached tools
(2) Properly reserved fuel
(3) Spare blade
(4) Things to notify your working
area (rope, warning signs)
(5) Whistle (for collaboration
or emergency)
(6) Hatchet or saw (for removal
of obstacles)
(7) First-aid kit
3. Do not wear loose clothing, jewelry,
short, trousers, sandals, or go
barefoot. Do not wear anything
which might be caught by a
moving part of the unit. Secure
hair so it is above shoulder length.
WORKING CIRCUMSTANCE
1. Never start the engine inside a
closed room or building. Exhaust
gases contain dangerous carbon
monoxide.
2. Never use the product,
a. when the ground is slippery
or when you can't maintain a
steady posture.
38
b. At night, at times of heavy fog,
or at any other times when
your field of vision might be limited
and it would be difficult to gain a
clear view of the working area.
c. During rain storms, during lightning
storms, at times of strong or gale-force
winds, or at any other times when
weather conditions might make it
unsafe to use the product.
WORKING PLAN
1. You should never use the product
when under the influence of alcohol,
when suffering from exhaustion or lack
of sleep, when suffering from
drowsiness as a result of having taken
cold medicine or at any other time
when a possibility exists that your
judgment might be impaired or that
you might not be able to operate the
product properly and in a safe manner.
2. When planning your work schedule,
allow plenty of time
to rest. Limit the amount of time
over which the product is to be
used continuously to somewhere
around 30 ~ 40 minutes per
session, and take 10 ~ 20 minutes
of rest between work sessions.
Also try to keep the total amount
of work performed in a single day
under 2 hours or less.
WARNING
1. If you don't observe the working
time, or working manner (See "USING
THE PRODUCT"), Repetitive Stress Injury
(RSI) could occur.
If you feel discomfort, redness and
swelling of your fingers or any other
part of your body, see a doctor
before getting worse.
2. To avoid noise complaints, in general,
operate product between 8 a.m. and
5 p.m. on weekdays and 9 a.m. to
5 p.m. on weekends.
NOTE
Check and follow the local regulati
ons as to sound level and hours of
operations for the product.
BEFORE STARTING THE ENGINE
1. The area within a perimeter of 15 m
(50 ft) of the person using the product
should be considered a hazardous
area into which no one should enter.
If necessary, yellow warning rope,
warning signs should be placed
around the perimeter of the area.