Haier HCH2400ACB Manual Del Usuario página 14

NON-VENTED (RECIRCULATING) INSTALLATION
1. Center the mounting bracket on the plumb line, at the edge of the ceiling.
2. Using screws appropriate to the wall material, attach the bracket to the wall.
NOTE: If your ceiling is not even, mount the wall bracket at the lowest level
point.
3. Using four mounting screws, attach the air deflector to the mounting bracket.
a
c
4. Measure the length of 6" (15.2 cm) metal duct needed to connect the transition
to the deflector.
NOTE: A minimum 1" (2.5 cm) length of metal duct should be fitted inside the
deflector.
b
d
e
12
a
b
c
a
b
a
c
X
a
b
c
d
e
a
Ceiling
b
Wall
c
Plumb Line
a
Mounting Screws
b
Air Deflector (not
provided)
c
Mounting Bracket
Air Deflector (not provided)
Vent Clamp
X = Length to Cut Vent
Duct
Vent Duct
Exhaust Outlet