Replacing A Lamp - Haier HCH2400ACB Manual Del Usuario

REPLACING A LAMP

Make sure the range hood lights are cool and power to the range hood
has been turned off before replacing the light bulb(s).
The lenses must be in place when using the range hood. The lenses
serve to protect the light bulb from breaking.
The lenses are made of glass. Handle carefully to avoid breakage.
Failure to do so could result in death, electric shock, cuts or burns.
Turn off the range hood light to allow the bulb to cool. To avoid damage or
decreasing the life of the new bulb, do not touch bulb with bare fingers. Wear cotton
gloves or use a tissue when replacing the light bulb.
If a new bulb does not illuminate, first check that it is inserted correctly in the socket
before calling service.
1. Disconnect power.
2. Insert a flat-blade screwdriver, and gently pry off the light shield.
3. Gently pull the burned out bulb from the socket.
4. Avoiding contact with skin, insert a new halogen bulb of the same size, shape
and wattage into the socket.
a
22
WARNING
Electrical Shock Hazard
a
a
Light Shield
a
Bulb