Midea MAW Serie Manual Del Usuario página 18

Fig. 7
Secure the bracket to the windowsill by
drilling 1/8" pilot holes and installing the
1/2" Type A screws as shown in Fig. 9.
If your window has a lip, make sure the
bracket is placed as shown in Fig. 8.
If your window does not have a lipped sill, be sure
to drill 1/8" pilot holes and install the 1" Type A
(Flat Sill) screws as shown in Fig. 9 below.
1" Type A
(Flat Sill)
1/2" Type A
Fig. 9
E. If necessary, cover the holes on the front of the bracket with the Bracket Sealing Foam.
Fig. 10
Page 18
Cotter Pin
INSIDE
Cover holes with
Bracket Sealing Foam
D. Check the level again and
ensure the bracket feels secure.
After making any necessary
adjustments, insert the cotter
pins into the Main Support Pins.
Vinyl Lip
OUTSIDE
Vinyl-Clad Windows
1" Type A
(Flat Sill)
1/2" Type A
Cover holes with
Bracket Sealing Foam
Fig. 8