Publicidad
Idiomas disponibles
Idiomas disponibles
Model 1968
!
WA R N I N G
The manufacturer has made
every effort to eliminate any
sharp edges. However, you
ASSEMBLY INSTRUCTIONS
should handle all compo-
Please read all instructions thoroughly before proceeding. Make sure all
nents with care to avoid
the plastic packing material is removed before assembling.
accidental injury.
Find a large, clean area to assemble your unit. Please refer to the parts list and
Some parts may contain
assembly diagrams as necessary.
sharp edges, especially as
noted in these instructions.
S T E P 0 1
Place griddle on a smooth flat surface and attach the four (4)
Wear protective gloves if
griddle feet and the four (4) M8 flange nuts to the bottom of the griddle in
necessary.
the pre-threaded holes. Ensure that the fuel nozzle is housed within the
burner opening.
S T E P 0 2
Turn the griddle over so it stands on its legs. Check the ignition
needle. The needle needs to be placed 3-7mm above the burner tube.
!
WA R N I N G
The manufacturer has made
every effort to eliminate any
sharp edges. However, you
should handle all compo-
nents with care to avoid
accidental injury.
Some parts may contain
sharp edges, especially as
noted in these instructions.
Wear protective gloves if
necessary.
!
C A U T I O N
Two people are recom-
mended for the assembly of
this product.
!
C A U T I O N
Two people are recom-
mended for the assembly of
this product.
Assembly Guide
| Owner's Manual
!
!
WA R N I N G
WA R N I N G
• Do not mix old and new
The manufacturer has made
batteries.
every effort to eliminate any
sharp edges. However, you
• Do not mix alkaline, stan-
should handle all compo-
dard (carbon-zinc) or
nents with care to avoid
rechargeable (ni-cad, ni-mh,
accidental injury.
etc.) batteries.
Some parts may contain
sharp edges, especially as
noted in these instructions.
Wear protective gloves if
necessary.
!
WA R N I N G
This appliance will be hot
during and after use. While
!
WA R N I N G
cooking, place unit on
heat-resistant and flame-re-
• Do not mix old and new
sistant surfaces to avoid
batteries.
damage and injury.
• Do not mix alkaline, stan-
dard (carbon-zinc) or
rechargeable (ni-cad, ni-mh,
etc.) batteries.
!
WA R N I N G
This appliance will be hot
during and after use. While
cooking, place unit on
heat-resistant and flame-re-
sistant surfaces to avoid
damage and injury.
05
Publicidad
