Publicidad
Idiomas disponibles
Idiomas disponibles
GB Operating instructions
Please familiarise yourself with these
operating instructions before using this
product because prolonged reliable
and trouble-free operation will only be
ensured if it is handled properly.
We hope your MobileGlue 1007/1007-S.
brings you lasting satisfaction.
About this document
Please read carefully and keep in a safe
place.
- Under copyright. Reproduction either
in whole or in part only with our
consent.
- Subject to change in the interest of
technical progress.
Safety precautions
Before use
Check the tool for any
damage (Charging cable,
housing etc.) before putting it
into operation and do not use
the tool if it is damaged.
Do not use liquid or pasty
adhesives!
The glue reaches tempera-
tures of up to 190 °C!
You could burn
yourself!
After skin contact with hot
glue: immediately cool with
cold water. Do not try to
remove hot-melt glue from
the skin. If necessary, seek
medical attention. After eye
contact with hot-melt glue:
immediately cool for approx.
15 min. with running water
and consult a doctor straight
away.
Use the applicator in dry
rooms only.
Do not use in conjunction
with highly inflammable/
combustible materials.
Due to risk of fire, do not
use on highly combustible
surfaces or in combustible
environments (e.g. paper,
textiles etc.).
The area you are glueing
must be free of grease,
dry and absolutely clean.
Glue marks on clothing
cannot be removed.
Make sure heat-sensitive
materials are suitable for
glueing with hot-melt
adhesive.
Drips of glue are best
removed when cold.
Do not pull the glue
stick out of the appli-
cator. Hot glue running into
the applicator may cause
damage.
Do not leave the applicator
unattended.
This tool may be used by
children aged 8 or above and
by persons with reduced
physical, sensory or mental
capabilities or lack of experi-
ence and knowledge if they
are supervised or have been
given instructions on how to
use the tool safely and under-
- 8 -
Publicidad
