CASO DESIGN Sound & Cool Black Manual Del Usuario página 28

DE
3.5 Electrical connection
EN
In order to ensure the safe and trouble-free operation of the device, the following instruc-
FR
tions must be observed for the electrical connection:
•
Connect the appliance to a properly installed power outlet with electrical data corre-
IT
sponding to the rating plate's specifi cations.
•
The connection between the device and the electrical network may employ a 3 meter
ES
long (max.) extension cable with a cross-section of 1.5 mm². The use of multiple plugs
or gangs is prohibited because of the danger of fi re that is involved with this.
NL
•
Do not bend the power cord. Place the power cord in a way so that you do not trip
over it. Make sure that the power cable is undamaged and has not been installed
RUS
under or over hot or sharp surfaces.
•
SE
This unit is not designed to be installed in an RV or used with an inverter.
•
The electrical outlet must be protected by a 16A safety cut-out switch.
PT
•
The electrical safety of the device is only guaranteed if the device is connected to a
properly installed protective conductor system. If in doubt, have the house instal-
lation checked over by a qualifi ed electrician. The manufacturer cannot be made
responsible for damages that are caused by a missing or damaged
protective conductor.
•
Options to connect the power cord:
In case you have a ground socket below the device use this
to plug in. Alternatively you can use a wall socket. In this case
make sure that the power cord is placed carefully to avoid
stumble, by placing under a carpet or by using the included
cable channel (K).
DANGER

The mains plug must be plugged fi rmly into the connection socket on the bottom of
the device, otherwise there is a risk of fi re.
28 CASO Sound & Cool
K