TFA 35.1065 Instrucciones De Uso página 5

TFA No. 35.1065 Anleit_12_22
Indoor weather station
Display mode
• In normal mode the left row shows the weather symbol, the middle row the
time in hours and minutes and the alarm and/or chime symbol (in case), the
right upper row the date and humidity, the lower row the day of the week and
the temperature.
• By pressing the °C/°F button the temperature unit can be changed from °C to
°F.
• To enter alarm mode, press the MODE button. The alarm time is displayed.
• To enter calendar mode, press 2 x the MODE button. The year is displayed.
Setting mode
• Press the SET button for 2 sec. to enter the respective setting mode and
select all settings one after the other.
• When the digits are flashing set the desired time by pressing the ADJ button.
Hold and press the button for a fast count.
A. Setting of the clock
Press the SET button (2 sec.)
Press the SET button
Press the SET button
Press the MODE button
B. Setting of alarm
Press the MODE button
Press the SET button (2 sec.)
Press the SET button
Press the MODE button
C. Setting of calendar
Press the MODE button
Press the SET button (2 sec.)
Press the SET button
Press the SET button
Press the MODE button
Activate / turn off alarm
• To activate / turn off the alarm and/or chime function, press the ADJ button in
alarm mode.
The respective symbol appears or disappears on the display.
• Press any button to stop the alarm.
8
12.12.2022 17:50 Uhr Seite 5
→ Select 12 or 24 hours system
by pressing the ADJ button
→ Select Time Hours
by pressing the ADJ button
→ Select Time Minutes
by pressing the ADJ button
→ Exit setting mode
→ Enter Alarm mode
→ Select Alarm time Hours
by pressing the ADJ button
→ Select Alarm time Minutes
by pressing the ADJ button
→ Exit setting mode
→ Enter Calendar mode
→ Select Date Year
by pressing the ADJ button
→ Select Date Month
by pressing the ADJ button
→ Select Date Day
by pressing the ADJ button
→ Exit setting mode
Indoor weather station
Snooze function
• Once the alarm starts to ring, you can activate the snooze function by press-
ing the SNZ button. The snooze symbol appears on the display. The alarm will
be interrupted for 5 minutes.
MAX / MIN values
• Press the ADJ button in normal mode and the highest temperature and
humidity values are displayed since the last reset.
• Press the ADJ button again, the display shows the lowest values since the
last reset.
• Press and hold the ADJ button to reset the MAX/MIN values to the present
temperature and humidity.
Weather forecast
• The instrument has no atmospheric pressure sensor. The weather forecast is
based on the changes of humidity values.
Care and maintenance
• Clean the instrument with a soft damp cloth. Do not use solvents or scouring
agents.
• Remove the battery if you do not use the product for a long period of time.
• Keep the instrument in a dry place.
Battery replacement
• Replace the battery when the display becomes weak or the alarm level
declines.
Troubleshooting
Problems Solution
➜ Ensure the battery polarity is correct
No indication
➜ Change the battery
➜ Change the battery
Incorrect display
Waste disposal
This product and its packaging have been manufactured using high-grade mate-
rials and components which can be recycled and reused. This reduces waste and
protects the environment.
Dispose of the packaging in an environmentally friendly manner using the collec-
tion systems that have been set up.
Disposal of the electrical device
Remove non-permanently installed batteries and rechargeable batteries
from the device and dispose of them separately.
This product is labelled in accordance with the EU Waste Electrical and
Electronic Equipment Directive (WEEE).
This product must not be disposed of in ordinary household waste.
9